Postprocessors
Unfortunately we don't have the resources to make postprocessors for all CNC machines in the whole world. Therefore we urge our customers and potential CNC machine suppliers to send us the postprocessors that they may make, then we will place them here for free use. If you have one or more postprocessors that you want to share with others, please zip them and send them to magic@magicsystems.com, and we shall place them here.
MACH3. Here are a couple of postprocessors for MACH3, which is a software based controller. Save it to your desktop and unzip the postprocessors to the folder post under ContourCAM on your PC. You can to find the MACH3 software here: MACH3.
The two postprocessors are MACH3P and MACH3M. MACH3P is for plasma cutting and MACH3M is for milling. You use them as follows: When you have generated your G-code in the ContourCAM Editor, you select ContourCAM=>Transmit to file... and select .TAP as extension. The .TAP-FILE you generate, you open with File=>Load G-CODE in MACH3.
MAKA2. Here is a postprocessor for a Maka HK785. Save it to your desktop and unzip the postprocessor to the folder post under ContourCAMon your PC.
PUMA. Here are three postprocessors for Puma TT1800, Puma TT2000 and Puma LY25000. Save them to your desktop and unzip the postprocessors to the folder post under ContourCAM on your PC.
